Deck & Fence Painting Melbourne
Family-owned · In the trade since 1987 · Master Painters member · No subcontractors
Timber decks, fences and outdoor structures — cleaned, prepared and coated properly for Melbourne conditions.
Proper preparation is often the difference between a deck coating that lasts for years and one that flakes by next summer.
Melbourne’s UV intensity, moisture cycles and temperature variation are harder on exterior timber than most homeowners expect. Decks and fences painted over failing or poorly prepared surfaces will fail faster than the original finish — often within a season.
If you are looking for deck restoration, deck staining or fence painting in Melbourne’s south-east, we focus on proper timber preparation, coating compatibility and repairs before the finish goes on.
We assess the timber condition first — checking for rot, checking adhesion of existing coatings, and checking moisture content. Where repairs are needed before coating goes on, we include them in the scope. That gives the coating system a better chance of holding up properly.
Family-owned and operated, with members in the trade since 1987. No subcontractors — our own team handles your job from assessment to completion.
Based in Glen Waverley
In the trade since 1987
Master Painters Member
Fully insured
Police & Working with Children checked
No subcontractors
Timber Decks, Fences and Outdoor Structures
We carry out deck and fence painting as standalone jobs or as part of a broader exterior repaint — we can include both in the same written scope and complete them under one accountable team. Each surface is assessed on-site — the preparation approach depends on the timber species, condition and what was previously applied.
What we recoat and repair
- Hardwood and softwood decks
- Treated pine decks
- Timber fences — paling, lapped and framed
- Timber pergolas and outdoor structures
- Gates and feature fencing
- Colorbond fences (cleaning, priming and recoating where applicable)
- Retaining walls and sleeper edges where paintable
- Handrails and balustrades
Timber assessment first
We check moisture content, rot, nail pops, joint separation and whether the existing coating is worth preserving or needs full removal. Coating over failing or wet timber fails fast — we do not skip this.
Surface preparation matched to the condition
New timber, previously oiled, previously painted and weathered bare timber all need different preparation approaches. We match the process to what the surface actually needs.
Appropriate coating system
Decks require a penetrating or film-forming system rated for foot traffic and UV. Fences need UV-stable exterior coatings. We specify the right product for the substrate and exposure — not a default one-size product.
What Deck & Fence Recoating Covers
Every deck and fence job is scoped on-site after a timber condition assessment. We don’t quote from photos or descriptions — the condition of the substrate determines the preparation approach and the price.
Where the timber needs repair before coating, we include it in the same scope. Nail pops, split palings, minor rot, damaged boards — assessed and priced as part of the written quote.
Decks and Fences — Different Surfaces, Different Requirements
Decks
Decks are high-wear surfaces — foot traffic, UV, moisture pooling, and seasonal movement all work against the coating. The preparation and product choice matter more here than almost any other exterior surface. We check moisture content before starting (timber with elevated moisture content should not be coated until it is suitable for the coating system), remove existing failing paint entirely where needed, and apply a system rated for the specific timber species and use level.
Common deck issues we see in SE Melbourne:
- Peeling or flaking from coating applied over wet or oily timber
- Greyish, weathered bare timber where coating has completely failed
- Raised grain on hardwood decks painted with incorrect systems
- Splitting and checking on exposed end grain
Fences
Timber fences in SE Melbourne typically need painting every 5–8 years, depending on orientation, tree cover and coating quality. South or east-facing fences in shaded yards are more prone to mould and moisture issues. North and west-facing fences take harder UV. We assess orientation and condition and advise on the appropriate product system.
Common fence issues we see:
- Chalking or fading on previously painted fences
- Mould growth on shaded south or east-facing fences
- Nail pops and split palings from moisture movement
- Unpainted or bare timber that has begun to grey and check
Deck & Fence Painting Costs
Costs depend on the size of the area, the condition of the timber, and the amount of preparation required. General guide for SE Melbourne:
Deck repairs and staining
Painting Service | Typical Guide Range |
|---|---|
Small deck up to 20sqm | $800 – $2,000+ |
Medium deck 20–50sqm | $1,500 – $3,500+ |
Large deck 50sqm+ | $3,000 – $6,000+ |
Decks requiring significant repairs or full coating removal | Quoted on inspection |
Fence painting and outdoor structures
Painting Service | Typical Guide Range |
|---|---|
Standard paling fence per linear metre (both sides, good condition) | $25 – $45+ per lm |
Fence painting with full preparation, repairs or difficult access | Quoted on inspection |
Pergolas and other structures | Quoted on inspection |
Note:
We provide a written fixed-price quote after an on-site assessment. Costs are determined by what the job actually requires — timber condition and preparation needs are assessed before quoting.
Why Melbourne Homeowners, Landlords and Property Managers Choose Us
Timber condition is assessed first
We check moisture, rot, existing coating adhesion and species before deciding the preparation approach. We don’t start until the surface is ready for coating.
Repairs included in scope
Nail pops, minor rot, split palings and damaged boards are assessed and priced as part of the written quote — not charged as extras after the job starts.
Written fixed-price quote
No phone estimates. We inspect on-site, scope the preparation and repairs, and provide a written fixed-price quote.
What Happens Next?
Request your quote
Call us or send through your details, including the suburb, property type, and the work you need quoted.
We inspect and quote properly
We inspect the property, assess the surfaces, identify preparation or repair work, and provide a clear written quote.
We prepare, paint and clean up
Our own team completes the preparation, repairs, painting, cleanup and final walkthrough.
Frequently Asked Questions — Deck & Fence Painting
Related Painting Services
For a comprehensive list of Melbourne painting and repair services offered, check our services page.
Get a Free Written Quote for Deck & Fence Painting
We inspect the timber on-site, assess its condition and preparation requirements, and then provide a clear, written, fixed-price quote. No final pricing without inspection. No subcontractors.
Helpful guide
Planning to update or restore your property’s fences? If you’re choosing products yourself, our guide to fence paint and how to choose the right product is worth reading first to discover how to choose the right products for timber or Colorbond, the essential surface preparation required, and how to ensure a durable, weather-resistant finish.
Main Melbourne Areas We Service
We are based in Glen Waverley and provide painting and repair-based repainting services across South East Melbourne suburbs, including:
We also service surrounding areas across South East Melbourne.
Request a Free Written Quote for Deck & Fence Painting
Need deck or fence painting and repairs in South East Melbourne? Based in Glen Waverley. Servicing South East Melbourne. Written fixed-price quote after on-site inspection.